<em id="qid9u"><acronym id="qid9u"><u id="qid9u"></u></acronym></em>

    <li id="qid9u"><acronym id="qid9u"></acronym></li>

  1. The Choice for Light and Medium Duty Industrial Applications

    With ratings up to 20HP, the VMX-PFE? is ideally placed to support smaller AC induction motors. Easy DIN rail mounting makes the VMX-PFE? the natural choice for distributors and integrators.

     

    AC Supply Voltage: 200 - 480 Vac

    HP Ratings: 1.5 to 20 HP

    Amp Ratings: 1 to 28 Amps

    Setup: Just 3 settings

    3S Technology: Automatci ramp control profiles

    Bypass: Built-in

    Call us for pricing and availabilty

    More Design Features

    Over Current Protection: Protects the Soft Starter against usage above its duty rating.

    Internally Bypassed: Reduces cost once bypass is active. Reduces cabinet size and less heat produced.

    Only 1.8” Wide (Size 1): Same width as typical contactor and enables a more compact cabinet to be used.

    Din-Rail Mount: For easy installation – it just clips on.

      Line Voltage Range
      230 to 460 VAC, 3 phase +10% -15% on all units,
      50/60Hz

      Current Ratings
      1 - 28A depending on unit selection

      Control Voltage
      24VDC

      Bypass
      Standard on all units

      Overload
      Standard Trip Class 10
      30 starts/stops per hour (max) - Class 10 with optional fan

      Enclosure
      IP20

      3S technology
      Automatic ramp control profiles ensure smooth start and stop performance, delivering stable acceleration and deceleration in all operating conditions.

      Setup
      3 Settings (Potentiometers)

      Indicators
      Multifunction LEDs on front panel

      Start Time
      1 to 30 sec.

      Stop Time
      0 to 30 sec.

      Start Level
      30 to 100%

    衡阳二五八麻将下载